List of products by supplier Milwaukee

MILWAUKEE - 3 in 1 pH/EC/TDS tester

(1 review)

€179.99 -5.56% €169.99

It is a compact handheld tester with the fastest microprocessor on the market. Also you will be able to measure pH, EC (conductivity) and TDS with a single instrument and a single probe.

• -5.56%
• -5.56%
• 2 in stock

I buy available

MILWAUKEE - Calibration solution 12880 µS/cm - 20ml

(3 reviews)

€1.20 -17.5% €0.99

Milwaukee 12880 µS/cm Calibration Solution is a laboratory-grade 12880 µS/cm conductivity standard solution , prepared from a NIST-traceable potassium chloride solution, that allows you to recalibrate your conductivity meter or tester. conductivity .

• -17.5%
• -17.5%
• 33 in stock

I buy available

MILWAUKEE - Calibration solution 800 ppm - 20ml

(3 reviews)

€1.20 -17.5% €0.99

Milwaukee 's 800 ppm Calibration Solution is a standard, laboratory-grade 800 ppm TDS solution , prepared from a NIST-traceable potassium chloride solution, that allows you to recalibrate your conductivity meter or tester. Consult your conductivity meter or tester manual to find the correct standard for your device.

• -17.5%
• -17.5%
• 39 in stock

I buy available

MILWAUKEE - CO2 Solenoid Valve

(10 reviews)

€35.99 -8.33% €32.99

The Milwaukee CO2 Solenoid Valve is a high quality solenoid valve that is safe and completely reliable for controlling CO2 addition in aquariums and reverse osmosis. It controls the CO2 supply.

• -8.33%
• -8.33%
• 9 in stock

I buy available

MILWAUKEE - Conductivity meter and digital thermometer

(1 review)

€54.99

The Milwaukee conductivity meter is a pocket-sized device used to measure electro-conductivity in EC or TDS and the temperature of your solutions.

• Sold out

I buy unavailable

MILWAUKEE - Conductivity tester digital - 0 - 1990 μs/cm

(3 reviews)

€24.99

Milwaukee CD601 is a conductivity tester specifically designed for water analysis. The calibration procedure is very simple and quick. This tester has automatic temperature compensation, 10 uS/cm resolution and a range of 0 to 1990 uS/cm. CD601 comes complete with protective cap, calibration screwdriver, batteries and instructions.

• 5 in stock

I buy available

MILWAUKEE - Digital pH-Meter - pH 0-14

(11 reviews)

€24.99

This pH meter, model pH600 from Milwaukee is easy to use: it allows you to measure the pH without any difficulty . Light, compact and fast, the pH value is displayed instantly: it is the ideal object for your terrarium or your aquarium!

• 7 in stock

I buy available

MILWAUKEE - Digital TDS-Meter - 0 - 1990 ppm

(2 reviews)

€24.99

The CD600 is a TDS tester specially designed for water analysis . The calibration procedure is very simple and quick . This tester has automatic temperature compensation, 10ppm resolution and 0-1990ppm range. The CD600 is supplied with a protective cap, calibration screwdriver, batteries and instructions.

• 5 in stock

I buy available

MILWAUKEE - Electrode Cleaning Solution - 20ml

(9 reviews)

€1.20 -17.5% €0.99

Single-use pH and ORP electrode cleaning solution.

• -17.5%
• -17.5%
• 82 in stock

I buy available

MILWAUKEE - Fresh-Start - 25 Sachets - Starter Solution...

(5 reviews)

€24.99

Fresh-Start from Milwaukee is a set of pH calibration and electrode rinse solutions designed to optimize the accuracy of your measurements and prevent cross-contamination between samples or calibration solutions. (pH 4.01: 5 sachets, pH 7.01: 10 sachets, pH 10.01: 5 sachets, cleaning solution: 5 sachets)

• 75 in stock

I buy available

MILWAUKEE - KCL pH and ORP Electrode Refill Solution - 230ml

(1 review)

€17.99

MA9011 is a reagent grade pH and ORP electrode filling solution that contains 3.5M KCl. This filling solution is specifically formulated for double junction electrodes. Double junction electrodes have two chambers. The inner chamber has an Ag/AgCl reference wire and a KCl + AgCl filling solution. The outer chamber contains a KCl filling solution.

• 1 in stock

I buy available

MILWAUKEE - MA917B/1 - Lab Grade Rechargeable pH Probe

€119.99

The MA917B/1 probe is a laboratory grade rechargeable glass electrode with BNC plug designed for fast response and long life.

• 2 in stock

I buy available

MILWAUKEE - MC120 - Pro pH monitor - pH monitor

(2 reviews)

€99.99

Milwaukee 's MC120 is a high-end pH monitor that offers lab-grade accuracy with easy-to-view continuous monitoring of pH levels with alarms.

• 1 in stock

I buy available

MILWAUKEE - MC122 pH Controller Tester

(9 reviews)

€119.99 -€7.00 €112.99

The new Milwaukee MC1200 Aquarium pH Controller with Plug gives you the option to choose whether the electrical output is active at a pH above or below the set point . Fixing to the wall for continuous use .

• -€7.00
• -€7.00
• 1 in stock

I buy available

MILWAUKEE - MC125 Pro - pH / ORP Controller

(2 reviews)

€209.99

The Milwaukee MC125 PRO pH and ORP Controller is designed for those who want to automatically measure and adjust pH and ORP levels with one simple controller. Simply set your pH and ORP settings and let the Milwaukee pH Controller do the rest.

• Sold out

I buy available

MILWAUKEE - MC810 Max - pH/TDS/Temperature Monitor

(3 reviews)

€239.99 -10% €215.99

Milwaukee 's MC810 is a pH/TDS/Temperature monitor that allows you to automatically monitor your pH/TDS/Temperature levels 24/7.

• -10%
• -10%
• 1 in stock

I buy available

MILWAUKEE - MP810 Peristaltic Dosing Pump - 1.5 L/h

(2 reviews)

€89.99

Milwaukee MP810 peristaltic dosing pump with constant dosing rate of 1.5 L/h (25 mL/min). No regulation possible. Maximum pressure of 2 bars. Made of polypropylene. Delivered with its accessories (tubes, filter, injection connector) in a cardboard box. Can be connected to an MC122 pH controller .

• 3 in stock

I buy available

MILWAUKEE - MP815 Peristaltic Dosing Pump - 2.2 L/h Max

€99.99

Milwaukee MP815 peristaltic metering pump with adjustable metering flow from 0 to 2.2 L/h (0 to 37 mL/min). Maximum pressure of 2 bar. Made of polypropylene. Delivered with its accessories (tubes, filter, injection connector) in a cardboard box. Can be connected to an MC122 pH controller .

• 4 in stock

I buy available

MILWAUKEE - MW12 - Digital photometer for phosphates

(2 reviews)

€59.99

MW12 from Milwaukee is a digital photometer for phosphates , just add the reagent and get an accurate digital reading of ±0.04 ppm in minutes. Ideal for aquariums, aquaculture and corals, laboratories, water treatment, classrooms...

• 3 in stock

I buy available

MILWAUKEE - MW301 - Portable meter - For conductivity

(2 reviews)

€109.99

MW301 from Milwaukee is a portable conductivity meter with automatic temperature compensation . This equipment has been designed to meet the needs of growers for equipment adapted to the harsh environment of agricultural and hydroponic applications .

• 3 in stock

I buy available

MILWAUKEE - MW700WP Portable Light Meter

(3 reviews)

€109.99

Milwaukee portable luxmeter equipped with a waterproof probe , allowing to measure the light intensity . It comes with a light sensor connected to the device which measures from 0 to 50000 Lux.

• 1 in stock

I buy available

MILWAUKEE - MW806 4-in-1 - pH/EC/TDS/Temp

€458.56 -10.59% €409.99

MILWAUKEE MW806 MAX – Ultra-accurate 4-in-1 pH, EC, TDS & Temperature Meter

The MILWAUKEE MW806 MAX is the perfect companion for hydroponics enthusiasts or for aquarium use. This 4-in-1 tester offers a simple and reliable solution for testing pH, conductivity (EC), TDS and temperature with a single compact probe. It eliminates tangled cables and multiple devices, while offering ultra-intuitive automatic calibration . Built to last, it is equally at home in the field or the lab thanks to its robust IP67 housing . With its large, easy-to-read display , replaceable combination probe and portability, it is the perfect tool for effectively monitoring nutrients and ensuring optimal growth of your plants.

• 4-in-1 measurement: pH, EC, TDS and temperature with a single probe.
• Robust design and easy calibration for long-lasting use.
• Perfect for hydroponic, aquaponic and greenhouse growing.

• -10.59%
• -10.59%
• 2 in stock

I buy available

MILWAUKEE - ORP Solution 200-275mV - 230ml

€18.99

MA9020 is a laboratory grade 200-275 mV ORP solution certified to meet the range.

MA9020 is used to check the health and accuracy of an ORP electrode. Milwaukee solutions are designed to help you achieve reliable and repeatable redox measurements.

• 3 in stock

I buy available

MILWAUKEE - pH 10.01 Calibration Solution - 20ml

(10 reviews)

€1.20 -17.5% €0.99

Calibration solution ph 10.01 for pH meter electrode. The accuracy of a measurement is strongly dependent on the calibration, among other things.

• -17.5%
• -17.5%
• 485 in stock

I buy available

MILWAUKEE - pH 4.01 Calibration Solution - 20ml

(15 reviews)

€1.20 -17.5% €0.99

pH 4.01 calibration solution for pH meter electrode. The accuracy of a measurement is strongly dependent on the calibration, among other things.

• -17.5%
• -17.5%
• 542 in stock

I buy available

MILWAUKEE - pH 7.01 Calibration Solution - 20ml

(19 reviews)

€1.20 -17.5% €0.99

pH 7.01 calibration solution for pH meter electrode. The accuracy of a measurement is strongly dependent on the calibration, among other things.

• -17.5%
• -17.5%
• 453 in stock

I buy available

MILWAUKEE - pH and ORP Electrode Rinse Solution - 20ml

(1 review)

€1.20 -17.5% €0.99

The electrode rinse solution is ideal for use as an intermediate rinse between samples or calibration solutions to prevent cross-contamination. This flushing solution is also ideal for removing the buildup of basic salt deposits on the probe or cap caused by evaporation of the storage solution. Even though the accumulation of salt deposits is normal, they must be removed before measuring or calibrating. Electrode rinse solution should not replace cleaning or storage solutions.

• -17.5%
• -17.5%
• 104 in stock

I buy available

MILWAUKEE - pH and ORP Electrode Storage Solution

(4 reviews)

€12.99

MA9015 is a laboratory grade electrode storage solution prepared with premium chemicals to improve performance and extend the life of your pH and ORP electrodes, testers and pens.

Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.

• 2 in stock

I buy available

MILWAUKEE - pH Meter MW101 - With probe

(4 reviews)

€109.99

pH tester Milwaukee meter (MW101 + SE220) with cable (1 meter), range from 0.0 to 14.0 pH .

• Sold out

I buy available

MILWAUKEE - pH probe with BNC socket

(24 reviews)

€39.99 -25.06% €29.97

Replacement probe for Milwaukee PH meter. Also suitable for any type of PH meter fitted with a BNC connector.

• -25.06%
• -25.06%
• 11 in stock

I buy available

MILWAUKEE - pH-Meter and Digital Thermometer

€54.99

The Milwaukee pH Meter and Temperature Tester (pH55) is a pocket-sized digital meter, waterproof IP67 with LCD digital screen on which the pH and the measured temperature (°C or °F) are displayed on two separate lines.

• Sold out

I buy unavailable

MILWAUKEE - Phosphate Reagent - MI512-0 - Reagent Kit

(7 reviews)

€9.99

Milwaukee Phosphate Reagent MI512-0 includes high quality reagents that are ready to use with the Milwaukee MW12 Low-Range Phosphate Tester . Reagents and tester use adaptation of ascorbic acid method. The reagents are designed for use with samples that have an expected range of 0.00 to 2.50 ppm (mg/L) PO4.

• 3 in stock

I buy available

MILWAUKEE - Precision Refractometer

(11 reviews)

€129.99 -19.3% €104.90

The refractometer is an optical instrument that uses refractive index measurement to determine the salinity of natural and artificial seawater, seawater or brackish intermediates.

• -19.3%
• -19.3%
• Sold out

I buy available

MILWAUKEE - SE-220 - Laboratory Grade Double Junction pH...

(1 review)

€49.99

Milwaukee SE-220 is a probe designed for use with Milwaukee MW101 and MW102 PRO pH meters .

• 6 in stock

I buy available

MILWAUKEE - SE-300 - Lab Grade Double Junction ORP Probe

€69.99

Milwaukee 's SE-300 is a lab-grade double-junction platinum ORP probe with BNC receptacle.

• Sold out

I buy unavailable

MILWAUKEE - SE-510 - Lab Grade EC/TDS Probe

€69.99

The SE510 Conductivity (EC)/Total Dissolved Solids (TDS) probe is designed for use with the Milwaukee MW301 and MW401 PRO conductivity meters. This probe has a DIN connector and a 3' (1 m) cable.

Range: 0 to 1999 mg/L (ppm)

• 2 in stock

I buy available

MILWAUKEE - SE600 - Combined pH / EC / TDS probe

€119.99

MILWAUKEE SE600 – High-precision pH/EC/TDS combination probe

The MILWAUKEE SE600 combination probe is a reliable and precise tool for monitoring pH , conductivity (EC) , and total dissolved solids (TDS) in water with a single measurement. Designed for aquariums, nutrient tanks, and aquaculture systems, it allows for easy monitoring of water quality and quick action in case of deviations. Its dual electrode system ensures stable measurements, while its maintenance-free gel design simplifies daily use. Compatible with the Milwaukee MW801 and MW802 PRO devices, the SE600 is ideal for both demanding hobbyists and professionals seeking reliable and consistent results.

• Simultaneous measurement of pH, EC and TDS with a single probe
• Reduced maintenance thanks to the gel and double junction point
• Compatible with Milwaukee MW801 and MW802 PRO testers

• 2 in stock

I buy available

MILWAUKEE - Standard solution pH 10.01 - 230ml

€12.99

MA9010 is a laboratory grade pH 10.01 buffer solution certified to the standard with an accuracy of ±0.01 pH eliminating inaccuracies associated with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.

• 3 in stock

I buy available

MILWAUKEE - Standard solution pH 4.01 - 230ml

(2 reviews)

€12.99

MA9004 is a laboratory grade pH 4.01 buffer solution certified to the standard with an accuracy of ±0.01 pH eliminating inaccuracies associated with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.

• 4 in stock

I buy available

MILWAUKEE - Standard solution pH 7.01 - 230ml

(3 reviews)

€12.99

MA9007 is a laboratory grade pH 7.01 buffer solution certified to the standard with an accuracy of ±0.01 pH eliminating inaccuracies associated with mixing buffers.

Milwaukee solutions are designed to help you achieve reliable, repeatable pH measurements while extending the life of your electrode.

• 4 in stock

I buy available

MILWAUKEE - TDS Calibration Solution 1382ppm

(4 reviews)

€1.20 -17.5% €0.99

Calibration solution for TDS meter at 1382ppm . The accuracy of a measurement is strongly dependent on the calibration, among other things.

• -17.5%
• -17.5%
• 36 in stock

I buy available

MILWAUKEE - TDS Calibration Solution 1413 μS/cm

(5 reviews)

€1.20 -17.5% €0.99

Calibration solution for TDS meter at 1.413 μS/cm . The accuracy of a measurement is strongly dependent on the calibration, among other things.

• -17.5%
• -17.5%
• 73 in stock

I buy available

MILWAUKEE - Thermometer TH310 - Precision thermometer

(1 review)

€34.99

Milwaukee TH310 stick thermometer . Scientists and lab technicians when performing repetitive measurements rely on the accuracy of their thermometers. For this reason, Milwaukee has developed the TH310, a reliable, pocket-sized thermometer that is intended to make glass thermometers obsolete.

• 4 in stock

I buy available

MILWAUKEE - Thermometer with probe - Range: -50.0°C to...

(3 reviews)

€34.99

Milwaukee TH300 precision thermometer with stainless steel probe and 1 meter cable .

Dimensions: 106 x 58 x 19mm. Comes complete with battery and user manual.

• 3 in stock

I buy available

MILWAUKEE EC59 Pro – 3-in-1 Waterproof EC, TDS and...

€69.99

A 3-in-1 conductivity meter for easy water quality monitoring

The Milwaukee EC59 Pro allows you to monitor three complementary parameters without needing multiple devices. Electrical conductivity indicates the overall quantity of charged ions present in the water. The higher this value, the more dissolved substances the water generally contains that are capable of conducting electricity.

The measurement of TDS, or total dissolved solids , provides an estimate of this concentration as a value expressed in ppm. The temperature is displayed directly by the instrument and used to automatically correct the conductivity measurements. This design makes monitoring faster and eliminates the need for manual corrections due to temperature variations.

In the aquarium hobby, the EC59 Pro can be used to monitor reverse osmosis water, check the stability of prepared water, or observe the overall evolution of mineralization. It is also useful in hydroponics, soilless cultivation, irrigation systems, water treatment facilities, and environmental monitoring.

• New
• 2 in stock

I buy available