The RED SEA Surface Comb Set -R42629 is a genuine replacement part designed to replace the overflow combs on compatible Red Sea Reefer aquariums. Its role is simple yet essential: to maintain consistent surface water suction , limit the accumulation of oily film, trap floating debris, and ensure smooth flow to the sump. By keeping the surface cleaner, this set contributes to better oxygenation, more stable filtration, and visually clearer water. Easy to install, it clips directly onto the original overflow without glue or modifications. It's the ideal replacement when the old combs are worn, broken, deformed, or excessively clogged.
Genuine Red Sea replacement to maintain reliable compatibility with Reefer aquariums.
Helps to remove oily film and particles from the water surface.
Quick installation by clipping, without tools, glue or modification of the overflow.
The RED SEA R42493 sump connection tube set allows you to replace the original plumbing components on several large REEFER aquariums. This official replacement part is especially useful when a tube is damaged, leaking, or needs to be replaced after dismantling the aquarium. Designed to RED SEA specifications, this kit ensures a reliable connection between the aquarium and its sump , without any risky modifications or alterations to the existing system. It is particularly suitable for the REEFER-S 850, REEFER-S 1000, REEFER 3XL 900 models and several generations of G2, G2+, and G3 systems. It's the ideal solution for restoring a clean, safe installation that is perfectly compatible with the aquarium's original plumbing.
Genuine RED SEA spare part to replace a worn or damaged settling tank connection.
Extensive compatibility with several REEFER 750, 850, 900, 950 and 1000 aquariums.
Installation adapted to the existing circuit, without DIY or complex plumbing modifications.
RED SEA Power Center Max C R40501: clean and centralized power management
The RED SEA Power Center Max C R40501 allows for the neat centralization of power to equipment installed on Red Sea Max C-130 and Max C-250 aquariums. Specifically designed for these two models, it integrates discreetly into their cabinets to minimize visible cables and messy connections. This power center simplifies the connection of various devices essential for the aquarium's operation, while offering a clearer and easier-to-manage setup. Its robust design also helps protect equipment against short circuits and certain electrical fluctuations . It is an ideal replacement part for restoring a clean, functional, and perfectly adapted original installation to the Max C environment.
Centralizes electrical connections to keep the aquarium cabinet clean and perfectly organized.
Designed specifically for integration with Red Sea Max C-130 and C-250 aquariums.
Facilitates the daily management of equipment while improving the safety of the electrical installation.
The Red Sea ReefSense Leak Detector is a safety sensor designed to immediately detect any abnormal presence of water around a reef aquarium. Thanks to its sensitive detection, it recognizes both reverse osmosis and saltwater , allowing for rapid alerts before a small leak becomes a serious problem. Connected to a ReefControl Lite or ReefControl Pro controller, it integrates directly into the ReefBeat ecosystem to send notifications and trigger automatic safety actions. Installed under the cabinet, near the sump, or close to plumbing connections, it provides an extra layer of protection that is particularly useful in automated reef setups.
Detects reverse osmosis water as well as seawater to effectively monitor sensitive areas of the installation.
Quickly sends alerts via the ReefBeat ecosystem when an abnormal presence of water is detected.
Can participate in automatic security actions , including shutting down compatible connected equipment.
The RED SEA ReefControl Grounding Probe is designed to enhance electrical safety in marine and reef aquariums. Connected to the dedicated port of the ReefControl Power , it neutralizes stray voltages that can be generated by pumps, heaters, and other submerged electrical equipment. In a saltwater aquarium, the high conductivity makes these phenomena more noticeable, especially upon contact with the water. Thanks to its corrosion-resistant titanium tip and weighted design, the probe remains properly submerged and ensures reliable contact with the water. A simple, discreet, and particularly useful safety component for a reef setup equipped with numerous electrical devices.
Neutralizes stray voltages present in the water originating from the aquarium's electrical equipment.
Its corrosion-resistant titanium tip is perfectly suited for prolonged use in seawater.
The weighted design keeps the probe submerged to ensure permanent and reliable contact .
The RED SEA ReefSense ATO R35829 Water Level Sensor is a smart sensor designed to accurately monitor the water level in a reef aquarium and support the operation of an automatic top-off system. Its one-piece design combines multi-input EC sensing technology , a saltwater-resistant titanium probe, and an integrated digital thermometer accurate to 0.1°C . Connected to the ReefControl ecosystem, it enables real-time monitoring, notifications, and data logging. It can also participate in more advanced automation, such as controlling a cooling fan or heater via ReefControl Power, for more comprehensive and secure aquarium regulation.
Precise water level monitoring thanks to multi-input EC technology.
Integrated digital thermometer accurate to 0.1 °C for fine monitoring of aquarium temperature.
Enables automated heating or cooling when used with compatible ReefControl equipment.
The RED SEA ReefSense Magnetic 4-Probe Holder R35826 is designed to neatly hold up to four probes in an aquarium, sump, or sump. Its magnetic attachment allows for stable, discreet, and easily repositionable installation without drilling or gluing. Compatible with glass walls up to 12 mm thick , it simplifies the organization of ReefSense probes and prevents them from moving freely within the system. By keeping each sensor in a consistent position, this holder also helps maintain consistent measurement conditions. A simple and practical solution for grouping pH, salinity, temperature, ORP, or other compatible probes in one place.
Accommodates up to four probes to keep a technical installation clean and perfectly organized.
Quick magnetic fixing, without drilling or gluing, for easily adjustable positioning .
Compatible with glass walls up to 12 mm thick for versatile installation.
The RED SEA ReefSense Single Probe Holder R35837 allows you to neatly and securely hold a probe in your aquarium, sump, or sump. Its height-adjustable design facilitates precise sensor positioning to maintain consistent immersion and measurement conditions. It accepts standard 12 mm and 18 mm diameter probes and attaches to glass walls 4 to 12 mm thick . Ideal for pH, ORP, temperature, salinity, or other compatible sensors, this holder simplifies setup organization while preventing dangling probes. A compact, stable, and easily repositionable solution for a cleaner ReefSense or ReefControl installation.
Compatible with 12mm and 18mm probes to fit many aquarium sensors.
Height adjustment allows for precise positioning of the probe according to the available water level.
Suitable for glass panes 4 to 12 mm thick for simple and versatile installation.
RED SEAReefSenseExtension 4-Port R35827-T allows you to easily increase the connectivity capacity of the ReefControl Pro controller. With its four additional ports , it allows you to connect more ReefSense probes and sensors to monitor more parameters within a single setup. Once added to the ReefControl Pro, it enables the system to accommodate up to seven ReefSense probes or sensors . This extension is particularly useful for well-equipped reef aquariums, large setups, or users who want to centralize multiple measurements without using multiple controllers. Compact and designed for the Red Sea ecosystem, it provides a simple and clean upgrade for an existing ReefControl installation.
Adds 4 additional ReefSense ports to connect more probes and sensors to the ReefControl Pro.
Allows the use of up to 7 ReefSense probes or sensors on the same installation.
Ideal for reef aquariums requiring comprehensive monitoring of multiple parameters simultaneously .
RED SEAReefSenseExtension 4-Port R35827-T allows you to easily increase the connectivity capacity of the ReefControl Pro controller. With its four additional ports , it allows you to connect more ReefSense probes and sensors to monitor more parameters within a single setup. Once added to the ReefControl Pro, it enables the system to accommodate up to seven ReefSense probes or sensors . This extension is particularly useful for well-equipped reef aquariums, large setups, or users who want to centralize multiple measurements without using multiple controllers. Compact and designed for the Red Sea ecosystem, it provides a simple and clean upgrade for an existing ReefControl installation.
Adds 4 additional ReefSense ports to connect more probes and sensors to the ReefControl Pro.
Allows the use of up to 7 ReefSense probes or sensors on the same installation.
Ideal for reef aquariums requiring comprehensive monitoring of multiple parameters simultaneously .
The RED SEA R42650 bubble trap foam is an original replacement part designed for use in the sump of several compatible REEFER aquariums. It traps some of the microbubbles in the water circuit before they return to the main aquarium, while also contributing to cleaner circulation in the sump area. Ideal for replacing worn, deformed, or heavily soiled foam, it conforms to Red Sea specifications for proper integration into the sump. It is compatible with the REEFER 750 G2, 750 G2+, 900 G2, 900 G2+, and REEFER Peninsula S-950 G2+ . Replacing it ensures a clean setup that conforms to the original configuration.
Genuine Red Sea spare part designed to fit directly into the sump of compatible models.
Reduces microbubbles that could potentially return to the aquarium via the return circuit.
Compatible with several REEFER G2 and G2+ models , including the 750, 900 and Peninsula S-950.
The RED SEA ReefControl Power 6 R35819 control panel allows you to manually control the six outlets of the ReefControl Power 6 system without using the ReefBeat app. Thanks to its LED-backlit switches , it instantly displays the status of each outlet and provides direct access to essential aquarium equipment. Return pump, skimmer, heater, lighting, and accessories can thus be controlled locally in seconds. Compact and easy to install, this module connects directly to the main ReefControl Power 6 unit . This is the control panel only ; the Power 6 power supply and its outlets are not included.
Manual control of the six sockets of the ReefControl Power 6 without opening the ReefBeat mobile application.
LED backlit switches for immediate visualization of the status of each connected device.
Direct and intuitive installation on an already installed and operational ReefControl Power 6 system.
New
1 in stock
Find all Red Seaspare parts at Zoanthus. If there is a missing part in this list, you can send us a part request using the contact form on the site.
