You may also like
THE ReefControl Pro Deluxe is designed for aquarists who want to consolidate the monitoring and automation of their aquarium into a single system. Where a traditional setup accumulates independent controllers, screens, and applications, ReefControl centralizes information from multiple ReefSense probes.
The Deluxe version is distinguished primarily by its particularly comprehensive equipment. It allows for immediate monitoring of several key parameters without having to purchase each probe separately. This gives the user a much more holistic view of their aquarium's behavior.
The measurements are continuously accessible in ReefBeat, which allows for monitor the evolution of the parameters 24 hours a day, to detect drift more quickly and to receive alerts when certain values fall outside defined ranges.
The ReefControl Pro Deluxe kit includes the main ReefSense probes needed for comprehensive monitoring of a reef aquarium. It comes with a pH probe + temperature, a salinity and temperature probe and one ORP probe.
This combination allows monitoring of several particularly important parameters. pH indicates the chemical balance of the water, temperature indicates the thermal stability of the tank, while salinity allows monitoring of the overall salt concentration.
The ORP measurement, or oxidation-reduction potential, provides additional information on the overall evolution of the aquatic environment. By combining all this data in ReefBeat, the ReefControl Pro Deluxe makes it easier to read trends and understand the variations observed in the tank.
The ReefControl Pro Deluxe also comes with a ReefSense leak detector. This accessory adds an important dimension to the monitoring of the installation by allowing the rapid detection of the abnormal presence of water near the aquarium or its technical cabinet.
It can be positioned in a sensitive area, for example near the settling tank, a pump, a fitting or equipment that could cause a leak in case of a problem.
When integrated into a compatible automated system, the detector can become a true security element by triggering an alert or certain predefined actions in order to to limit the consequences of a leak or overflow.
The controller has four ports for ReefSense probes and sensors. This capability already allows for the simultaneous connection of several measuring tools, including those supplied with the Deluxe kit.
For installations requiring even more monitoring, the system can be extended up to seven ReefSense probes or sensors thanks to a compatible extension.
This scalability allows the controller to adapt to the evolution of the tank. It thus becomes possible to gradually add other sensors as needed, without having to reconsider the entire architecture of the control system.
The ReefControl Pro Deluxe features two 12V DC outputs which can be used to control certain compatible low-voltage equipment.
These outputs can be used with a pump, fan, solenoid valve, or other suitable device. Their operation can be linked to data measured by the ReefSense probes.
For example, a fan can be activated when the temperature exceeds a defined value, then deactivated when the water returns to the desired range. This interaction between measurement and action allows ReefControl to not only monitor the tank, but also to react automatically to observed conditions.
Data from the various sensors can be used to create operating scenarios tailored to the installation. The controller can then trigger an action when a defined condition is met.
Temperature can control a ventilation system, while a leak detector can serve as the starting point for a security routine. The possibilities depend on the connected equipment and the configuration chosen in ReefBeat.
This approach allows for the implementation of a more autonomous and responsive installation, which is particularly useful when a problem occurs during an absence or outside of the usual monitoring periods.
The ReefControl Pro Deluxe has a Dedicated output for the ReefControl Power. Once the two devices are paired, the measurements from the ReefSense probes can also be used to control the Power smart plugs.
This combination allows for the automation of mains-powered equipment, for example a heater, a pump, a skimmer, a fan, a cooler or other compatible electrical devices.
The ReefControl Pro collects and analyzes information from the sensors, while the ReefControl Power manages the power supply to the various devices. Together, they form a complete aquarium monitoring and automation solution.
The ReefSense combined pH + temperature probe allows you to simultaneously monitor two parameters essential to the stability of a reef aquarium.
Rather than relying solely on manual, one-off measurements, the controller records their evolution over time. This continuous monitoring makes it possible to visualize daily pH variations or temperature changes related to lighting, heating, or ambient conditions.
An unusual trend then becomes easier to identify, allowing intervention before a drift becomes truly problematic.
The ReefSense salinity and temperature probe included in the kit allows you to continuously monitor salinity levels of the aquarium.
This information is particularly useful in marine aquariums, where evaporation removes water but leaves salts in the system. A change in water level can therefore lead to a gradual alteration in salt concentration.
Continuous monitoring makes it possible to detect unexpected variations more quickly and to relate this information to the operation of an evaporation compensation system or other elements of the installation.
There ORP probe included measures the redox potential of the water. This parameter provides additional information on the general evolution of the reef environment and on the oxidation and reduction reactions present in the system.
Its main interest lies in monitoring its trend over time. An unusual change may prompt a check of the organic load, oxygenation, skimming, or other elements likely to influence the aquarium's balance.
Combined with pH, temperature and salinity measurements, it complements the overall view offered by the ReefControl Pro Deluxe.
ReefSense probes and sensors communicate digitally with ReefControl. This architecture allows different types of sensors to be connected to the available ports while maintaining a common interface.
Digital technology is particularly valuable in a reef aquarium where numerous electrical devices can create interference. Signal conversion directly at the probes helps to limit the influence of electromagnetic interference likely to affect a conventional analog transmission.
The principle of universal ports also allows for more free organization of the configuration and for the system to evolve with future compatible ReefSense sensors.
The ReefControl Pro Deluxe is fully integrated into the application RED SEA ReefBeat, available on smartphones and tablets.
The measurements from the various probes are grouped together to allow for easy viewing of current values and their evolution. This centralization eliminates the need to switch between controllers to check each parameter separately.
Historical data also allows users to identify trends that would be much more difficult to detect with simple one-off tests. This enables users to compare observed variations across multiple parameters and gain a better understanding of their aquarium's behavior.
Continuous monitoring allows the system to flag certain situations requiring the aquarist's attention. Alerts can be sent when a parameter falls outside a configured range. or when a sensor detects an anomaly.
The presence of the leak detector is particularly interesting in this context, since it allows you to be quickly warned of a problem that might otherwise remain invisible for several hours.
This remote monitoring is particularly useful during absences, when no one is present in front of the aquarium to directly observe any changes.
The ReefControl Pro Deluxe uses a Wi-Fi and Bluetooth connection in order to communicate with the ReefBeat environment and facilitate its commissioning.
Once configured, the system can transmit information to the compatible iOS and Android application. This allows the user to monitor their installation from their phone or tablet.
This connectivity also allows for the gradual integration of ReefControl with other equipment Red Sea compatible with ReefBeat in order to build a more consistent management environment.
With several probes included, four ReefSense ports expandable to seven, and two 12V outputs, the ReefControl Pro Deluxe is particularly suitable for reef aquariums requiring detailed monitoring.
It is particularly suitable for installations where parameter stability is a priority and where several pieces of equipment need to be managed simultaneously.
The Deluxe version primarily allows you to have a complete set of sensors from the start, without having to gradually assemble your measurement equipment.
Even though the kit is already very complete, the ReefControl Pro Deluxe maintains a scalable architecture. The maximum capacity of seven ReefSense probes or sensors allows for the later addition of new measurement or security tools as needed.
The ReefControl Power can also be added to extend control to mains-powered electrical equipment. The installation can therefore be expanded gradually without replacing the main controller.
This modular design allows the system to be adapted to an aquarium that becomes more complex over time or to an installation whose needs change.
The kit includes three probe holders in order to properly maintain the various sensors in the settling tank or in a suitable technical area.
Stable positioning allows the probes to remain properly immersed and facilitates access during cleaning, maintenance or calibration operations.
These supports also avoid having to improvise a separate mounting for each probe when installing the controller.
The ReefControl Pro Deluxe comes in a particularly comprehensive kit including:
Brand : Red Sea
Range : ReefControl
Model : ReefControl Pro Deluxe
Reference : R35815EUR-T
ReefSense Ports: 4
Maximum capacity: up to 7 probes or sensors with compatible extension
Exits: 2 × 12 V DC
ReefControl Power Connection: 1 dedicated exit
PH probe: included
Temperature probe: included via the combination probes
Salinity probe: included
ORP probe: included
Leak detector: included
Probe supports: 3 included
Connectivity: Bluetooth / Wi-Fi
Application : ReefBeat on iOS and Android
Functions: Continuous monitoring, historical data, alerts, and automation of compatible equipment
Use : Advanced control and security for a marine or reef aquarium
