Detailed analysis
General information
“Overall quality” is a quick reading of the tank’s general condition: the higher the score, the closer all measured parameters are to the recommended target values. It is not a “judgment” of the tank, but a guide for setting priorities: an average score may hide 1 or 2 really important parameters that should be corrected first.
The “By major categories” chart shows where the biggest gap lies: basic values (salinity, KH), major elements (Ca, Mg…), nutrients (NO3, PO4), trace elements (I, Fe, Mn…), and pollutants. The idea is simple: you immediately spot the category or categories pulling the score down, then go to the detailed table to see exactly which elements are in “Warning” or “Needs correction”.
Method tip: always start by stabilizing salinity and KH (these are the foundations), then adjust the major elements (Calcium / Magnesium), and only then the nutrients and trace elements. And above all: correct gradually. Several small, well-controlled adjustments are better than one big correction all at once.
Overall quality
By major categories
These synthetic indicators give you an overall view of your aquarium’s chemical balance, beyond the individual values. Rather than analyzing each element separately, they group several related parameters together to assess overall consistency.
The “Macro / Halogens Average” corresponds to a grouping of major and halogen elements (such as calcium, magnesium, potassium, iodine, bromine, etc.). These elements play a central role in coral growth, biological stability, and the overall proper functioning of the tank.
The “Organic Factors Average” groups together the parameters related to nutrients and organic compounds (nitrates, phosphates, organic carbon, etc.). It helps assess whether the organic load is balanced, too high (risk of algae, cyanobacteria), or too low (risk of deficiencies and starving corals).
Ratios are expressed as percentages, with a target set at 100%. A ratio close to 100% indicates that, overall, the elements in the group are aligned with their target values. A ratio below 100% suggests an average deficiency, while a ratio above it may indicate an overall excess.
These averages do not replace a detailed element-by-element analysis, but they are ideal for quickly detecting an overall drift and tracking your tank’s evolution over time. Use them as trend indicators: if an average remains far from 100% over time, it is recommended to examine the relevant elements in the detailed table.
Macro / Halogens Average
Organic Factors Average
This panel gives you an immediate view of the parameters that require special attention. It highlights only the values that are outside the target zone, so you can focus on what matters most.
A “Needs correction” status indicates a significant deviation that should be treated as a priority. A “Warning” status indicates a more moderate deviation to watch and adjust gradually.
Filters let you display only “Needs correction” parameters, only those in “Warning”, or the full set. The detailed table below updates automatically.
Each element is clickable: one click scrolls to its row in the table, giving you quick access to the value, the visual gauge and the actions.
The detailed table groups together all the chemical elements measured in your aquarium, classified by major families to make it easier to read. Each row corresponds to a specific element (calcium, magnesium, iodine, nitrate, etc.), with all the information needed to understand its current situation.
The “Measurement” column shows the value detected in the analysis. If the element is marked as ND (not detected), it means it is below the laboratory’s detection limit. Right next to it, the visual deviation gauge lets you interpret the value at a glance: target zone (green), warning zone or needs-correction zone depending on the gap from the target.
The “Status” column summarizes this information with a clear label (OK, Warning, Needs correction) to help you prioritize actions.
The “Action” button opens a correction recommendation tailored to your volume and the observed deviation, while the “Info” button gives a more scientific explanation of the element’s role in the aquarium.
Use this table as your main decision tool: start with the “Needs correction” rows, then handle the “Warning” ones, and leave the OK parameters under simple monitoring.
Basic parameters
| Element | Measurement | Visual deviation | Status | Actions |
|---|---|---|---|---|
| DKH Carbonate hardness |
7.8 dKH
Ideal value :
7.5
|
|
OK | |
| EC Conductivity |
49.7 mS/cm
Ideal value :
53
|
|
OK | |
| SG Density |
1.021 kg/L
Ideal value :
1.0233
|
|
OK | |
| pH pH |
8.16 pH
Ideal value :
8.15
|
|
OK | |
| PSU Salinity |
32.5 PSU
Ideal value :
35
|
|
Warning |
Base
DKH
Carbonate hardness
OK
Measured
7.8 dKH
→
Target
7.5
dKH
EC
Conductivity
OK
Measured
49.7 mS/cm
→
Target
53
mS/cm
SG
Density
OK
Measured
1.021 kg/L
→
Target
1.0233
kg/L
pH
pH
OK
Measured
8.16 pH
→
Target
8.15
pH
PSU
Salinity
Warning
Measured
32.5 PSU
→
Target
35
PSU
Major elements
| Element | Measurement | Visual deviation | Status | Actions |
|---|---|---|---|---|
| B Boron |
5.4 mg/L
Ideal value :
4.65
|
|
OK | |
| Br Bromine |
80.7 mg/L
Ideal value :
68
|
|
Warning | |
| Ca Calcium |
439 mg/L
Ideal value :
420
|
|
OK | |
| Cl Chloride |
17946 mg/L
Ideal value :
19500
|
|
Warning | |
| F Fluoride |
0.28 mg/L
Ideal value :
1.3
|
|
Needs correction | |
| Mg Magnesium |
1459 mg/L
Ideal value :
1350
|
|
Warning | |
| K Potassium |
501 mg/L
Ideal value :
400
|
|
Needs correction | |
| Na Sodium |
9885 mg/L
Ideal value :
10700
|
|
OK | |
| Sr Strontium |
10.6 mg/L
Ideal value :
8
|
|
Needs correction | |
| SO4 Sulfate |
5273 mg/L
Ideal value :
2700
|
|
Needs correction | |
| S Sulfur |
1760 mg/L
Ideal value :
900
|
|
Needs correction |
Major
B
Boron
OK
Measured
5.4 mg/L
→
Target
4.65
mg/L
Br
Bromine
Warning
Measured
80.7 mg/L
→
Target
68
mg/L
Ca
Calcium
OK
Measured
439 mg/L
→
Target
420
mg/L
Cl
Chloride
Warning
Measured
17946 mg/L
→
Target
19500
mg/L
F
Fluoride
Needs correction
Measured
0.28 mg/L
→
Target
1.3
mg/L
Mg
Magnesium
Warning
Measured
1459 mg/L
→
Target
1350
mg/L
K
Potassium
Needs correction
Measured
501 mg/L
→
Target
400
mg/L
Na
Sodium
OK
Measured
9885 mg/L
→
Target
10700
mg/L
Sr
Strontium
Needs correction
Measured
10.6 mg/L
→
Target
8
mg/L
SO4
Sulfate
Needs correction
Measured
5273 mg/L
→
Target
2700
mg/L
S
Sulfur
Needs correction
Measured
1760 mg/L
→
Target
900
mg/L
Nutrients
| Element | Measurement | Visual deviation | Status | Actions |
|---|---|---|---|---|
| NO3 Nitrate |
0.4 mg/L
Ideal value :
5.5
|
|
Needs correction | |
| NO2 Nitrite |
0.03 mg/L
Ideal value :
0.05
|
|
OK | |
| PO4 Phosphate |
0.059 mg/L
Ideal value :
0.06
|
|
OK | |
| P Phosphorus |
40 µg/L
Ideal value :
33
|
|
OK | |
| SiO2 Silicates |
0.18 mg/L
Ideal value :
0.44
|
|
Needs correction | |
| PO4 TOT Total phosphate |
0.122 mg/L
Ideal value :
0.1
|
|
OK |
Nutrients
NO3
Nitrate
Needs correction
Measured
0.4 mg/L
→
Target
5.5
mg/L
NO2
Nitrite
OK
Measured
0.03 mg/L
→
Target
0.05
mg/L
PO4
Phosphate
OK
Measured
0.059 mg/L
→
Target
0.06
mg/L
P
Phosphorus
OK
Measured
40 µg/L
→
Target
33
µg/L
SiO2
Silicates
Needs correction
Measured
0.18 mg/L
→
Target
0.44
mg/L
PO4 TOT
Total phosphate
OK
Measured
0.122 mg/L
→
Target
0.1
mg/L
Trace elements
| Element | Measurement | Visual deviation | Status | Actions |
|---|---|---|---|---|
| Ba Barium |
56.4 µg/L
Ideal value :
12.5
|
|
Needs correction | |
| Cr Chromium |
0 µg/L
Ideal value :
0.5
|
|
N/A | |
| Co Cobalt |
0 µg/L
Ideal value :
0.25
|
|
N/A | |
| Cu Copper |
1.75 µg/L
Ideal value :
2
|
|
OK | |
| I Iodine |
67 µg/L
Ideal value :
67.5
|
|
OK | |
| Fe Iron |
1.32 µg/L
Ideal value :
1.275
|
|
OK | |
| Li Lithium |
27 µg/L
Ideal value :
265
|
|
Needs correction | |
| Mn Manganese |
0.45 µg/L
Ideal value :
0.25
|
|
OK | |
| Mo Molybdenum |
13.9 µg/L
Ideal value :
15
|
|
OK | |
| Ni Nickel |
0.51 µg/L
Ideal value :
3
|
|
Warning | |
| Se Selenium |
0 µg/L
Ideal value :
0.5
|
|
N/A | |
| Si Silicon |
90 µg/L
Ideal value :
150
|
|
Warning | |
| V Vanadium |
350 µg/L
Ideal value :
3
|
|
Needs correction | |
| Zn Zinc |
0 µg/L
Ideal value :
5.5
|
|
N/A |
Minor
Ba
Barium
Needs correction
Measured
56.4 µg/L
→
Target
12.5
µg/L
Cr
Chromium
N/A
Measured
0 µg/L
→
Target
0.5
µg/L
Co
Cobalt
N/A
Measured
0 µg/L
→
Target
0.25
µg/L
Cu
Copper
OK
Measured
1.75 µg/L
→
Target
2
µg/L
I
Iodine
OK
Measured
67 µg/L
→
Target
67.5
µg/L
Fe
Iron
OK
Measured
1.32 µg/L
→
Target
1.275
µg/L
Li
Lithium
Needs correction
Measured
27 µg/L
→
Target
265
µg/L
Mn
Manganese
OK
Measured
0.45 µg/L
→
Target
0.25
µg/L
Mo
Molybdenum
OK
Measured
13.9 µg/L
→
Target
15
µg/L
Ni
Nickel
Warning
Measured
0.51 µg/L
→
Target
3
µg/L
Se
Selenium
N/A
Measured
0 µg/L
→
Target
0.5
µg/L
Si
Silicon
Warning
Measured
90 µg/L
→
Target
150
µg/L
V
Vanadium
Needs correction
Measured
350 µg/L
→
Target
3
µg/L
Zn
Zinc
N/A
Measured
0 µg/L
→
Target
5.5
µg/L
Pollutants
| Element | Measurement | Visual deviation | Status | Actions |
|---|---|---|---|---|
| Al Aluminum |
31.8 µg/L
Ideal value :
17.5
|
|
Warning | |
| Sb Antimony |
0 µg/L
Ideal value :
|
|
N/A | |
| As Arsenic |
0 µg/L
Ideal value :
|
|
N/A | |
| Cd Cadmium |
0 µg/L
Ideal value :
|
|
N/A | |
| Cs Cesium |
0 µg/L
Ideal value :
|
|
N/A | |
| Ga Gallium |
0 µg/L
Ideal value :
|
|
N/A | |
| La Lanthanum |
0 µg/L
Ideal value :
2
|
|
N/A | |
| Pb Lead |
0 µg/L
Ideal value :
|
|
N/A | |
| Hg Mercury |
0 µg/L
Ideal value :
|
|
N/A | |
| Nd Neodymium |
0 µg/L
Ideal value :
|
|
N/A | |
| Ag Silver |
0 µg/L
Ideal value :
|
|
N/A | |
| Te Tellurium |
0 µg/L
Ideal value :
|
|
N/A | |
| Tl Thallium |
0 µg/L
Ideal value :
|
|
N/A | |
| Sn Tin |
0 µg/L
Ideal value :
5
|
|
N/A | |
| Ti Titanium |
0 µg/L
Ideal value :
|
|
N/A | |
| W Tungsten |
0 µg/L
Ideal value :
|
|
N/A | |
| U Uranium |
0 µg/L
Ideal value :
|
|
N/A | |
| Zr Zirconium |
0 µg/L
Ideal value :
|
|
N/A |